Choose Your Set
  • None
  • 210lb Set
  • 250lb Set
  • 270lb Set
  • 320lb Set
Choose Your Weight
$237.00
$300.00
$374.00
$449.00
Bar and Weight Plate Tree
Add
+$212.00
Horizontal Plate Rack
Add
+$175.00
Free Shipping
30-Day Money Back

California Proposition 65 Notice

Competition Bumper Plates (LB)
Competition Bumper Plates (LB) - 25lb Pair
  • Close-up view of half of a blue 45lb competition bumper plate showing zinc-coated steel disc insert and raised white
  • Close-up view of a yellow 35lb competition bumper plate showing zinc-coated steel disc insert and raised white weight marking lettering.
  • Close-up view of the edge of a red 55lb competition bumper plate.
  • Close-up view of a green 25lb competition bumper plate showing zinc-coated steel disc insert and raised white
  • Side view of a lifter holding a barbell loaded with a pair of red 55lb competition bumper plates in the front rack position.
  • Side view of a lifter loading a blue 45lb competition bumper plate onto a barbell on the ground.
  • Lifter in the set-up position getting ready to perform a deadlift with a barbell loaded with a pair of red 55, blue 45, yellow 35, and green 25lb competition bumper plates.
  • Full view of a REP 6-post PR-4000 power rack with green 25, yellow 35, blue 45, and red 55lb competition bumper plates on the weight horns, and a racked barbell loaded with blue 45lb competition bumper plates.
  • Close-up view of a racked barbell loaded with a blue 45lb competition bumper plate.
  • View of barbell loaded with a pair of blue 45lb competition bumper plates racked on a REP PR-4000 power rack.
  • Lifter with a barbell loaded with 45lb Competition Bumper Plates in the back rack position preparing to squat outside of a PR-4000 rack with spotter arms, strap safeties, and weight horns storing Competition Bumper Plates (LB) and change plates.
  • Close up view of a lifter preparing to unrack a barbell loaded with 45lb Competition Bumper Plates from the J-cups on a PR-4000 rack.
  • Lifter loading a barbell with Competition Bumper Plates (LB) onto a barbell resting on spotter arms attached to a PR-4000 rack.
  • Lifter in the bottom of a front squat using a barbell loaded with a pair of 55lb Competition Bumper Plates inside of a PR-4000 rack with strap safeties attached.

OVERVIEW

PRODUCT DIMENSIONS

FAQS

  • Should I get bumper or iron plates?

    Bumper plates are manufactured to withstand drops onto the floor, which is desirable for Olympic weightlifting (such as snatch, clean and jerk, hang cleans), where you often drop the plates onto the ground. Iron plates are better for lifts that do not involve the weights hitting the ground (such as bench press, squats, and curls), because they can cause damage to the floor, the barbell, and to the plates themselves.

  • Do I need to do anything when I first receive the bumper plates?

    When bumper plates arrive, unpack them and let them air out for a few days to allow any odor, however faint, to fade.

  • What can I do to extend the life span of my bumper plates?

    To extend their life span, try to drop plates as close to straight down as possible. If your bar collars get loose during a workout, retighten them so your plates always land straight up and down. This will lessen the sideways force on the bumper plate insert. Also, flooring with some type of give (like heavy-duty rubber mats or a weightlifting platform) will help absorb some of the impact from dropping the plates.

  • Can I load bumper and iron plates on the same bar?

    We do not recommend this, because iron and bumper plates can have slightly different diameters, meaning all the force from dropping the weights goes into the larger plate, causing those plates and your barbell to wear more quickly. It is best to keep all plates on your bar of the same type.

  • What is the diameter of the insert?

    All our bumper plates have a 2” Olympic-standard inner diameter and will fit 2” standard barbells.

  • Do REP Competition Bumper Plates (LB) have a warranty?

    Yes, they come with a five-year warranty. Note: The warranty is void if the bumper plates are mixed with Hi-Temp Bumper Plates. Hi-Temps have a smaller diameter than regular plates, which means a bar loaded with a mix of REP's bumper plates and Hi-Temps will result in the bumper plates taking all the load, causing them to degrade faster.

WHAT OUR CUSTOMERS THINK