.png?v=1660152721)
Add stability and function to your power rack with the uniquely shaped Rear Base Stabilizer. It is compatible with 4000 and 5000 series racks (PR-4000, PR-5000, Omni, and Apollo). The RBS provides a ton of sturdiness without adding a large footprint. When attached to your rack, this stabilizer even removes the need to bolt down your PR-4000 or PR-5000 with 41” crossmembers (but not with shallower crossmembers, due to stability). In addition, use it as a necessary anchor point for the optional Lat and Low Row Attachment.
The stabilizer can also be used to hold storage items or to organize your spotter arms up and off the floor. The RBS mounts to the inside of the uprights, making it more compatible with future attachments without compromising stability. It is heavy-duty, made from 3x3”, 11-gauge steel. The stabilizer is made with a 5/8” hole for the 4000 Series rack or a 1” hole that fits the 5000 Series. It is finished in with a metallic black powder coat.
-
Material3x3" 11-Gauge Steel
-
Width41.3"
-
Depth9.5" Depth Added
-
Bolt Plate Height9.8"
-
4000 Series Hole Size5/8"
-
5000 Series Hole Size1"
-
FinishMetallic Black Powder Coated
The main difference between the original RBS and the current is where they mount to the rack. The original mounts to the rear of the uprights and the current RBS mounts to the inside of the uprights. This change makes it more compatible with future attachments without compromising stability.
No, this is not compatible with the Ares Cable Attachment.
The Rear Base Stabilizer adds stability and function to your rack. It is a required anchor point for the Lat and Low Row Attachment for racks of all depths and it increases stability of a power rack by minimizing lateral movement.
Although the Athena Side-Mount Functional Trainer does not require the use of a RBS, the new design of the RBS is compatible with the Athena Side-Mount Functional Trainer (single side or dual side). Note: The original RBS is not compatible with the Athena Side-Mount Functional Trainer (single side or dual side).
The RBS adds 9.5” to the depth of a four-post rack. It does not add any depth to a six-post rack when mounted on the center uprights.
We only recommend this for the 41” depth crossmembers because shorter crossmembers don’t allow as much distance between the uprights, which reduces stability within the rack. Therefore, we recommend bolting down racks of other sizes, even with the RBS.
That being said, if you use the Iso Arms, Spotter Arms, or Globe Pull-Up Bar, you do want to bolt your rack down (even the 41” crossmembers with the Rear Base Stabilizer). With those attachments, you need to add Front Foot Extensions to keep the rack stable.
California Proposition 65 Notice